CurrencyHungarian forintFt
MagyarHUEnglishEN
AccountSign inCart0 Ft

For installers · Tiandy

Tiandy: questions and answers

Based​‌​​​​‌​ on​‌​‌‌​​‌ the​‌​​​​‌​ manufacturer's​​‌‌‌​‌​ manual​‌‌‌​‌​​ and​‌‌​​‌​‌ installers'​‌‌​‌‌​​ questions.

Initial setup and passwords

Does a Tiandy recorder have a default password?

No. On first start the recorder asks you to set a new password for the admin user. Set the backup phone number and the security questions at the same time, because you need them to reset the password.

What happens if you enter the wrong password several times in a row?

After five consecutive failed attempts, the recorder locks access for 5 minutes.

How do I reset a forgotten password?

If you provided a backup phone number, email address or security questions during activation, use the “Forget Password” function. If you did not provide any of these, export a key file using the SearchConfig tool; the manufacturer will issue the unlock code.

Do Tiandy cameras have a reset button?

Not all cameras have one. AK series (TC-C320N, TC-C321N, TC-C340N, TC-C341N) and SK-I series (TC-C3xQN, TC-C3xXN) cameras do not have a reset button. On SK-II and LK series cameras, Wi-Fi PT cameras and PTZ cameras, holding the reset button for 5 seconds restores the factory settings.

How do I change the password in the web interface and in the app?

In the web interface: Configuration → System → User Management → Edit. In the app: User → your account name → Account Management → Change Password. In both cases, you must enter the current password, and the new password must meet the strength requirements shown on screen.

Recording and storage

Which hard drive should you use in the recorder?

Use a SATA hard drive designed for surveillance systems. The manufacturer's manual recommends Seagate surveillance drives.

How much storage space does one hour of recording require?

It depends on the bit rate. According to the manufacturer's table, one hour of footage from a single camera requires approximately 900 MB at 2048 kbit/s and 1800 MB at 4096 kbit/s. These figures are for guidance only.

How many recorder channels does a bi-spectrum (thermal and visible) camera use?

Two: the recorder treats the thermal and visible images as separate channels. Allow two channels per camera when sizing the recorder.

Features and firmware

Which Tiandy recorders support face recognition?

The HA models in the LK series, such as the TC-R3105 44HA, TC-R3110 48HA and TC-R3120 4HA. Licence plate recognition requires an LPR camera.

Which languages does the mobile app support?

EasyLive Plus is available in 28 languages, including Hungarian and Polish, but not Slovak or Czech. The recorder menu does not support Slovak or Czech either.

How do I find the right firmware for my device?

Use the manufacturer part number. The “For installers” section on the product page lists the firmware for each part number. Before updating, check the part number on the device label, as the same model name may cover several hardware versions.

Security

How does Tiandy handle security vulnerabilities?

The manufacturer commits to fixing high-risk vulnerabilities within 3 days, medium-risk vulnerabilities within 7 working days and low-risk vulnerabilities within 30 working days. It publishes a separate security bulletin for high-risk and critical vulnerabilities. You can report vulnerabilities to security@tiandy.com.

Do Tiandy devices comply with the NIS2 Directive?

In September 2025, the manufacturer issued a NIS2 declaration stating that its security measures comply with the directive. According to the declaration, the devices only boot digitally signed software and only install digitally signed software updates. They protect data in transit using TLS 1.2/1.3 encryption and do not allow weak passwords to be set. The manufacturer also provides security updates for at least 36 months. The directive imposes obligations on larger organisations and also affects their suppliers. The manufacturer's declaration is available to download.

Troubleshooting by symptom

The discovery tool does not find the camera

First​‌​​​​‌​ check: Check​‌​‌‌​​‌ power​‌​​​​‌​ and​​‌‌‌​‌​ the​‌‌‌​‌​​ network​‌‌​​‌​‌ connection,​‌‌​‌‌​​ then run SearchConfig Tool.

Next​‌​​​​‌​ step: Check​‌​‌‌​​‌ the​‌​​​​‌​ IP​​‌‌‌​‌​ settings​‌‌‌​‌​​ against​‌‌​​‌​‌ the​‌‌​‌‌​​ manual​‌​​​​‌​ for​‌​‌‌​​‌ the​‌​​​​‌​ exact​​‌‌‌​‌​ model.​‌‌‌​‌​​ If​‌‌​​‌​‌ the​‌‌​‌‌​​ device still does not appear, send its model number and describe the connections.

No picture on the recorder's PoE port

First​‌​​​​‌​ check: Check​‌​‌‌​​‌ the​‌​​​​‌​ exact​​‌‌‌​‌​ camera​‌‌‌​‌​​ and​‌‌​​‌​‌ recorder​‌‌​‌‌​​ variants, power and device registration settings.

Next​‌​​​​‌​ step: For​‌​‌‌​​‌ a​‌​​​​‌​ mixed-brand​​‌‌‌​‌​ system,​‌‌‌​‌​​ also​‌‌​​‌​‌ check​‌‌​‌‌​​ the​‌​​​​‌​ supported​‌​‌‌​​‌ connection​‌​​​​‌​ method.​​‌‌‌​‌​ Include​‌‌‌​‌​​ the​‌‌​​‌​‌ recorder's​‌‌​‌‌​​ error message when requesting help.

Live video works, but motion alerts do not

First​‌​​​​‌​ check: Check​‌​‌‌​​‌ that​‌​​​​‌​ both​​‌‌‌​‌​ devices​‌‌‌​‌​​ support​‌‌​​‌​‌ the​‌‌​‌‌​​ required​‌​​​​‌​ event​‌​‌‌​​‌ and​‌​​​​‌​ that​​‌‌‌​‌​ event​‌‌‌​‌​​ handling​‌‌​​‌​‌ is​‌‌​‌‌​​ configured.

Next​‌​​​​‌​ step: A​‌​‌‌​​‌ working​‌​​​​‌​ live​​‌‌‌​‌​ view​‌‌‌​‌​​ does​‌‌​​‌​‌ not​‌‌​‌‌​​ confirm​‌​​​​‌​ this.​‌​‌‌​​‌ Include​‌​​​​‌​ the​​‌‌‌​‌​ firmware​‌‌‌​‌​​ versions​‌‌​​‌​‌ when​‌‌​‌‌​​ requesting help.

Forgotten password

First​‌​​​​‌​ check: Follow​‌​‌‌​​‌ the​‌​​​​‌​ manufacturer's​​‌‌‌​‌​ password​‌‌‌​‌​​ reset​‌‌​​‌​‌ instructions​‌‌​‌‌​​ for the exact model.

Next​‌​​​​‌​ step: If​‌​‌‌​​‌ you​‌​​​​‌​ need​​‌‌‌​‌​ help,​‌‌‌​‌​​ send​‌‌​​‌​‌ the​‌‌​‌‌​​ model​‌​​​​‌​ and​‌​‌‌​​‌ serial​‌​​​​‌​ numbers.​​‌‌‌​‌​ Do​‌‌‌​‌​​ not​‌‌​​‌​‌ send​‌‌​‌‌​​ your password.

The night picture is grainy

First​‌​​​​‌​ check: Check​‌​‌‌​​‌ the​‌​​​​‌​ camera's​​‌‌‌​‌​ night​‌‌‌​‌​​ mode​‌‌​​‌​‌ and​‌‌​‌‌​​ illumination​‌​​​​‌​ settings​‌​‌‌​​‌ against​‌​​​​‌​ the​​‌‌‌​‌​ manual​‌‌‌​‌​​ for​‌‌​​‌​‌ the​‌‌​‌‌​​ exact model.

Next​‌​​​​‌​ step: If​‌​‌‌​​‌ it​‌​​​​‌​ does​​‌‌‌​‌​ not​‌‌‌​‌​​ improve,​‌‌​​‌​‌ send​‌‌​‌‌​​ one​‌​​​​‌​ daytime​‌​‌‌​​‌ and​‌​​​​‌​ one​​‌‌‌​‌​ night-time​‌‌‌​‌​​ sample​‌‌​​‌​‌ image,​‌‌​‌‌​​ together with the exact model number. The images and settings are needed to identify the cause.

Need help with the installation?

Send​‌​​​​‌​ the​‌​‌‌​​‌ exact​‌​​​​‌​ camera​​‌‌‌​‌​ and​‌‌‌​‌​​ recorder​‌‌​​‌​‌ models,​‌‌​‌‌​​ the​‌​​​​‌​ problem​‌​‌‌​​‌ and​‌​​​​‌​ what​​‌‌‌​‌​ you​‌‌‌​‌​​ have​‌‌​​‌​‌ already​‌‌​‌‌​​ tried. We reply by email. Do not send passwords.

On​‌​​​​‌​ working​‌​‌‌​​‌ days​‌​​​​‌​ we​​‌‌‌​‌​ reply​‌‌‌​‌​​ the​‌‌​​‌​‌ same​‌‌​‌‌​​ day.

Write a message

We use cookies

Cookies required to run the shop are always active. Statistics and marketing cookies need your consent. Details in the Cookie Policy.